Skip to main content
Category

Health

health for youngsters, babies and adults

Slime time!

By Education, fun for children, Mental health, Uncategorized
by Sharon Me
Creator and Director of Artpod Ltd

Are your children obsessed with Slime? Have they taken over the kitchen with home-made recipes from YouTube, only for you to hear the cries of it didn’t work! Like all good recipes and experiments the devil is in the detail and with a few kitchen ingredients you can have some great fun with your children.

There are several different ways to make Slime, and you can, of course, experiment with using different ingredient sand different amounts to produce varying textures, colours and consistencies.

Here is my favourite Slime to make at home – corn flour Slime also known as Oobleck. This recipe is brilliant for all ages and abilities and is the easiest to make and play with.

Ingredients:
• 1 cup of corn flour
• Up to a quarter cup of water
• Plastic sheet to keep your kitchen table free of mess!

Instructions:
Mix the ingredients together adding a small amount of water at a time in a bowl and you’re done! Yes, that’s it! The more water you add the more dribbles you will get and the more corn flour, the thicker the Slime.

This Slime is, in fact, a non newtonian fluid, which means it simply cannot make up its mind as to whether it is a liquid or a solid! A good way to explain this is by showing how different forces work.

Ask your children to try and pick up the Slime in a ball and they will find it is quite tricky to pick up and that it runs through their fingers.

Next, ask them to pick some Slime up and quickly roll it into a ball in their hands really, really fast. The motion and force of the movement will keep it in a ball until they stop rolling, at which point it will trickle through your fingers again. All very messy but great fun!

Experiment with making more Slime by increasing the quantities and your little scientists could even try walking on Oobleck! This time, make the Slime in a large washing up bowl so that it is ankle deep. Use at least two packets of 400g corn flour, add water and mix to the same consistency as before.

Then ask your little scientists to try the following experiment.

Take their shoes
and socks off, roll up trousers or skirts and then challenge them to jump up and down on the Oobleck and see what happens.

It is a good idea to hold their hands at this point as they can get very excited (also put some old towels down in advance to soak up the splashes!)

Your little scientist will find that the force of jumping up and down causes the Slime to become temporarily solid – however, the second they stop jumping they will start to slowly sink into the Oobleck, which usually creates giggles galore!

To escape from the Oobleck, lift one foot up at a time and let the Slime dribble into the bowl before stepping on to the towel and then repeat with the second foot. Again, hold their hands to help them keep their balance.

Glow-in-the-dark Oobleck
If you want to take the science a bit further you may want to try to make glow-in-the-dark Slime – all you need is cheap indian tonic water to replace the regular water in exactly the
same quantities.

Tonic water will fluoresce under ultraviolet light, owing to the presence of quinine. In fact, the sensitivity of quinine to ultraviolet light is such that it will appear visibly fluorescent
in direct sunlight. You can also try making a mini darkroom with a regular pop up tent and a small black light torch or UV torch. This will make your Slime really glow!

Cleaning up afterwards
Remove any large quantities of Slime and put it in the bin.
Any additional splashes on clothes or carpets are best left to dry as the corn flour dries back into a powder and can then be vacuumed up. Then wipe over the surface with cold soapy water.

Sharon Mee is Creator and Director of Artpod Ltd who design and deliver parties, workshops and events for all ages and abilities. Creativity and fun are at the heart of what we do!
We believe in the power of the imagination and experimentation and that through the process of creating something, magical things can happen!

There’s a puncture out there with your name on it!

By family, Health, Safety, Uncategorized, Winter

So said the marketing campaign from Bridgestone at the launch of DriveGuard, their “game changing tyre innovation, which places safety and convenience in every driver’s seat. ”Contentious comment? Yes! Good solution for safer family driving? Read on and find out what we thought…

On average, every driver can expect to have six punctures in their lifetime and 27% of all roadside emergencies are tyre related. And don’t forget, a flat is not just an inconvenience. If a puncture happens rapidly, you have less control, less braking capability and are more susceptible to the prevailing road conditions. If it happens slowly, you may not even be aware you have a puncture for some time. That can affect your fuel consumption, road handling and even braking distances, particularly in wet or icy conditions. That is why all cars made after November 2014 are now required by law to have a Tyre Pressure Monitoring System (TPMS) built in. There are a variety of systems from the various car manufacturers as well as third party products that can be retro-fi tted to older vehicles, but fundamentally the TPMS alerts the driver that tyre pressure is low and that there may be a problem with one or more of your tyres. Over time, all tyres will lose pressure, including your often forgotten spare, so regularly check and top up your pressures as per your car manufacturers recommended levels. Whether you’re on the school run, driving to work, going home or meeting with friends – there’s never a convenient time for a puncture. In fact, in 23% of cases, punctures happen during the evening or late at night which adds additional stress and anxiety to the situation. Of these, more than 50% happen in inconvenient locations and no driver wants to fi nd themselves stranded, changing their tyre on the side of a busy road, in the dirt, in the rain, in the dark. Particularly if you’ve a young family on board. It’s perhaps no surprise that 72% of women and 33% of men don’t change their own tyre. However, if there’s no cellphone reception to call for assistance – you’re on your own!Where is the spare? Has it any air in it? Is it under all the luggage? Where are the locknut keys? Where is the jack? No wheel spanner! Is that skinny temporary thing really the spare? You fill it with what!?
With over 60% of drivers experiencing a puncture in the last four years – leading to feelings of helplessness and insecurity combined with lost time of up to three hours – the Bridgestone team have comeup with a very, very good answer to the problem. DriveGuard can, in practically all conditions, help prevent accidents resulting from punctures, sudden loss of pressure or other types of tyre damage. It provides a safe and reliable solution, allowing drivers to wipe their hands clean of inconvenient puncture scenarios.So how does it work?
At the moment of puncture, you still have complete control over the vehicle and are made aware of the problem by your PTMS on the dash. You can continue to move with the traffic without immediately having to pull over or risk driving on and shredding the tyre. A flat tyre leads to rubber deformation which generates heat or friction; by using a special patented compound, Bridgestone has created a high-tech cooling fi n design in the sidewall that channels the increased heat from the sidewall towards the rim and thus helps to preserve the tyre.Based on state of the art technology, DriveGuard’s sophisticated tread pattern helps evacuate water to resist hydroplaning, while engineered sipes increase the number of biting edges to enhance wet road traction. As a result, Bridgestone DriveGuard has achieved the highest rating in wet grip performance (EU Tyre Label: A grade) with short braking distances, while offering a level of comfort comparable to conventional tyres, placing it at the frontline of road safety.The new age DriveGuard technology uses a proprietary high-tech cooling fin design as well as supportive and tough reinforced sidewalls which allow drivers to maintain control and continue driving safely and comfortably for 80km at up to 80kmph (50 miles at 50mph) after a puncture; fast enough and long enough to arrive safely at their desired destination or to seek assistance at a convenient service point.We drove a standard saloon car, with a deliberately punctured tyre for over 10km, and it handled just like a normal car. In fact, one of the other review teams managed to have a SECOND puncture during testing, and drove trouble free with both front tyres blown!“Bridgestone DriveGuard empowers you to keep moving and avoid the immediate burden and unsafe circumstances of a fl at tyre; drivers get to choose when and where they have their tyre replaced – within the indicated speed and distance limits. Our revolutionary new technology will considerably contribute to road safety and give drivers additional peace of mind and convenience while on the road,” said Eduardo Minardi, Executive Chairman of Bridgestone EMEA. Bridgestone DriveGuard eliminates the need to carry a spare tyre and is environmentally conscious due to being fully recyclable. That means less weight so less fuel and 20% fewer tyres required per car so less material required.Despite the impressive safety benefi ts and convenience advantages, a full set is only marginally more expensive than any other premium tyres of the same size. Your vehicle will be safer, lighter and have more space on board.So, in our opinion Driveguard offers a major contribution to road safety and all family cars should have them fi tted whenever practically possible!
www.bridgestone.co.uk
www.facebook.com/Bridgestone.EU
www.twitter.com/bridgestonetyre
www.linkedin.com/company/bridgestone-europe